For house of grade 1,2,3 : wiring is embedded in wall, in floor :

1. Unpure conductors:
  1.1 UNPURE COPPERS: This will cause:
      • Voltage drop which causes fire.
      • Increasing resistance which makes high consumption, and the high temterature gets the insulation old causing fire. It is easy to be oxydated and broken. It is difficult to bend while wiring, especially the embbeded walls; hard to connect, easy to burst.
      • The wire sagged down while hanging on the pole.
  1.2 INADEQUATE AREA AND DIAMETER OF CONDUCTORS:: These will cause:
      • Overloaded and the high temterature gets the insulation old catching fire.
      • High consumption and voltage drop to the lines.

2. Low quality insulation:
  2.1 RECYCLED INSULATION: This will cause:
      • The insulation cracked causing dangerous.
      • Easy to be leaked in moisture. Easy to catch fire.
  2.2 UNPURE INSULATION: This will cause:
      • Soft insulators catching fire even the temperature is still under 700C.
      • Discolored insulators in a brief time and difficult to distinguish the phases.
      • The insulators getting aged and catching fire. Not capable of extinguishing fire themselves.

OUTSTANDING POINTS OF CADIVI’s ELECTRIC WIRE AND CABLE

  • Conductors are produced under International Electricity Technical Standards: Good Conduct Electricity, non-oxydize, easy using, non-broken during wiring, long life.
  • Insulation materials produced under International Electricity Technical Standards: Safety Insulation, anti-fired, meet all underground installation projects, inter wall.
  • Heavy-duty, long-lasting.